RDE300i Configuration Manager Software
Overview
RDE300i Configuration Manager Software (500092) allows you to configure, test, and normalize your RDE300i units. The software runs on a Windows PC or laptop.
Version History:
| Version Number | Release Date | Release Notes |
| R7546 | 2025-09-23 | |
| R7532 | 2025-08-20 | - Improved Normalization UI
- Added support for Cell Wash
|
| R7437 | 2025-05-02 | |
| R7258 | 2024-10-24 | - Support for improved IV curve fit in Firmware
- Improved support for AUX devices
|
| R7067 | 2024-08-13 | - Added a support button to recover from Event Code 8 or 9
- Added a message to be displayed for new Event Code 9
- Support for updated Isc/Voc mode and legacy mode with disconnect
|
| R6935 | 2024-06-28 | - Improved firmware update & support features
- Minor bug fixes
|
| R6880 | 2024-05-23 | - Improved firmware update & support features
|
| R6661 | 2024-01-12 | - Improved advanced settings dialog and help screen
- Improved configuration options dialog
- Added rear irradiance uniformity threshold
- Added event queue viewer for troubleshooting and support
|
| R6619 | 2023-11-08 | - Added more detailed Help information for Advanced settings dialog
- Added support to display event code 8 for firmware R6611 and higher
|
| R6573 | 2023-09-28 | - Added features to improve reliability of firmware update process
- Added user-settable irradiance threshold for soiling analysis
- Added features for integration with Mars Soiling Sensor
- Modified Advanced Configuration screen to better guide user selections
- Added Help button on Support tab
- Fixed a bug in the export data progress bar
|
| R6501 | 2023-07-21 | - Added support for integrating Mars and RC22 with RDE300i
- Added support for up to 4 RDE300i Follower units
- Added Event Code to Help screen
- Requires RDE300i Firmware R6492 or higher
|
| R6426 | 2023-04-13 | - Fixed bug on advanced settings configuration
|
| R6422 | 2023-04-12 | - Supports IV parameter rapid update configuration
- Improved performance index normalization
- Automatically checks for software updates
- Requires RDE300i Firmware R6425 or higher
|
| R6365 | 2023-04-05 | |
Installing the software:
- Download the 500092 installer .msi file from the link below
- Run the .msi installer
RDE300i Firmware
Overview
RDE300i Firmware (500108) is the software that runs directly on your RDE300i unit.
Version History:
| Version Number | Release Date | Release Notes |
| R7545 | 2025-09-23 | |
| R7521 | 2025-08-20 | - Added Remote Normalization
- Added support for Cell Wash
|
| R7485 | 2025-05-28 | - Fixed a bug that reported Event Code 100 during Pmax mini sweep failures
- Improved communication recovery mechanisms
|
| R7412 | 2025-03-28 | - Not user-loadable
- Increased efficiency of Isc/Voc mini sweeps under high current conditions
- Reduced module disconnect time during high-voltage operations
- Lowered component stress over time, improving overall system lifespan
|
| R7215 | 2024-10-24 | - Improved flexibility in IV curve fitting for Curtailment use cases
- Fixed a bug resulting in occasional false spikes in Pmax on cloudy days
- Improved support for AUX devices
|
| R7074 | 2024-08-13 | - Fixed a bug that could leave device stuck with internal communication issue reporting Event Code 8
- Fixed a bug that could cause RTD temperature values to be stuck
- Added improved default Isc/Voc sweep operation. Eliminates 1-second clicking sound.
|
| R6678 | 2024-02-14 | - Added support for new hardware revision with component substitution
- New units ship from Atonometrics with this version. There is no need to update any units in the field to this version.
|
| R6654 | 2024-01-12 | - Added rear-side irradiance uniformity filter for performance index
- Added event code for cool-down time between high power IV sweeps
- Fixed minor bugs
|
| R6611 | 2023-11-08 | - Fixed a bug that prevented reporting Isc or Irradiance at low Isc values
- Improved IV sweep capability for low Isc
- Improved IV update rate: parameters now update up to once per 1 second
- Added a feature to automatically attempt restart after internal communication error
- Improved sweep logic so Isc and Voc are always obtained, even at low currents
- Added event code 8 for internal communication error
- Improved consistency of Pmax/Isc reporting in different operating modes
- Fixed a bug that could cause missed Pmax mini sweeps at low current
- Fixed a bug that could cause some Follower registers to be reset incorrectly after a communication error
|
| R6569 | 2023-09-28 | - Added features for integrating Mars Soiling Sensor
- Added features to prevent need for external user restarts
- Improved communication with AUX devices
|
| R6492 | 2023-07-21 | - Added support for integrating Mars and RC22 with RDE300i
- Added support for up to 4 RDE300i Follower units
- Fixed a bug that could cause missed communication attempts
- Improved filtering of measurement results
- Requires RDE300i Configuration Manager R6501 or higher
|
| R6427 | 2023-04-13 | - Fixed bug affecting RTD temperature sensor startup
|
| R6425 | 2023-04-12 | - IV parameter rapid update
- Improved performance index normalization
- Requires RDE300i Configuration Manager R6422 or higher
|
| R6368 | 2023-04-01 | |
Installing the software: